- Street: efdf
- City: sdf
- Listed: 11th April 2018 3:35 am
- Expires: 44 days, 15 hours
Stainless Steel Woven Mesh include Stainless Steel Square Mesh and Dutch Weave Stainless Steel according to different weave type. While Square Mesh can be further divided into Plain Weave square mesh and Twill Weave square mesh .
Stainless Steel Wire Mesh basically refers to plain weave stainless steel square mesh.
Depending the wire gauge, there are light duty fine mesh, medium mesh, coarse mesh, and heavy duty mesh.
Light Duty mesh has wide application in Pharmaceutical, Food processing, Chemical, Petroleum, Printing and many other industries, mainly used for sizing and filtration.
Heavy Duty woven mesh are usually pre-crimped wire woven mesh, usually used as screening an fencing etc.
Light Duty Stainless Steel Wire Mesh is usually expressed in mesh count. That it the mesh holes number per inch. Coarse mesh is usually 1-10 mesh, Medium mesh is usually 10-100 mesh, Fine mesh is usually 100-500 mesh or finer.
Plain Weave Stainless Steel Wire Mesh Specifications
Mesh CountWire DiameterApertureOpen AreaWeight
#/inchInchMMInchMM%LB/100 Square Foot
When ordering plain weave stainless steel wire mesh, you need to specify whether it is selvage (looped) edge or raw edge type.
“selvage edge” refers to the edge or border of wire cloth that has a finished edge. When wire cloth is woven, the shute wires are woven in, continuously, forming a smooth edge that runs the length of roll while helping to prevent unraveling on certain specifications. Generally speaking, a selvage edge will increase the stability of a mesh and provide a safety edge for handling. In recent years, selvage edge has decreased in popularity due to difficulty in producing and increased costs to produce. When a selvage edge is required, it is important to specify, as raw edge is widely the norm in the industry.
“Raw edge” refers to edging that is not continuously woven and is usually the result of manufacturing wire mesh on a rapier loom. In this case, the shute wires are uncovered, or raw. Raw edge is the predominant edge type in the industry, particularly on finer mesh (usually, 20 x 20 Mesh or finer). Further, raw edge is often preferred when customers are looking to keep their costs down. China Stainless Steel Mesh
18 total views, 1 today