Welcome, visitor! [ Register | Login

P2.00

Stelltie Alloy 12 Sytop

  • Street: NO.35, xingnong Road,Shenbei District Shenyang,China
  • City: Shenyang
  • Province: Bulacan
  • Zip/Postal Code: 31310
  • Listed: 16th November 2018 7:23 am
  • Expires: This ad has expired
00cobalt-bushing

Description

According to the type of Stellite Alloy band saw blade serration, simply measure the curve shape of the sawtooth shape, go to the shop where the mold accessories tool is sold, and buy a corundum small grinding head that is suitable for the shape curve of the saw. The diameter of the grinding head is usually 3 The size of the millimeter to 6 mm is suitable. The shape of the grinding head can only be bought in the shape of a cylinder or a brush head.

Place the small grinding head with the appropriate zigzag curve on the sawtooth of the band saw blade. Observe whether the diameter of the grinding head conforms to the zigzag shape curve. Can the grinding front angle be ground? Only buy the shape curve suitable for the natural grinding saw. Corundum small grinding head. The hardness of the grinding head should be very hard. The price of this small grinding head is very cheap, a few corners.

Use the sawtooth of the blunt Stellite Alloy 3 band saw blade up, horizontally clamped on the fixture, check the condition of the sawing to see if the sawing correction is needed. If the sawing correction is needed, use the sawing pliers to carry out the corresponding Correct the tooth. After the sawing condition is checked and corrected, the sharpening is performed.

Install a suitable small grinding head on an adjustable hand drill or a small electric grinder (hand-held pen engraving machine with a speed of 10,000 rpm or a higher speed). Adjust the speed of the hand drill to High speed (also the speed of several thousand revolutions), the small electric grinder is adjusted to 3000 rpm or 4000 rpm. Place the grinding head on the root curve of the Stellite Alloy 12 band saw blade serration, and lean against the front corner of the sawtooth. Move the grinding head gently back and forth a few times, and naturally it will be able to grind very sharp serrations.

https://www.cobaltalloy.net/

  

101 total views, 1 today

  

Listing ID: 9525bee705de7f2f

Report problem

Processing your request, Please wait....

Leave a Reply